Table of Contents
Plumbing pertaining to your garden can simply be described as setting up an irrigation system for your plants. Whether you’re adorning your yard with colorful flowers, maintaining your landscape, or growing your own source of healthy vegetables, adequate amounts of water at the right time is essential to your success. Installing a plumbing system doesn’t have to be a grand undertaking but it can surely be one of the most delightful projects to take on at home.
If you’re planning to work on your garden’s plumbing, here are some of the things that you might want to consider:
1. Allocate Water Properly
Every kind of plant has their own watering needs, you can’t just apply a blanket setting for all of them. Planning a garden should include determining which type of plant will be planted in what area, so that you’ll know the amount of water to allocate respectively. Many people often do light sprinkling daily hoping it’ll make up for their plant’s watering needs, however this type of method can be harmful especially for plants that are directly exposed to sunlight. Light sprinkling only wets the top layer of the soil (about an inch deep) and this amount of moisture cannot alleviate the stress the plants experience on a hot day. Even if you do this daily, the shallow penetration of water into the soil cannot reach the roots and is easily evaporated by the heat. Instead of sprinkling lightly everyday, you can try soaking the plant or apply generous amounts of water once a week. That way, the roots will have access to water and because the soil is soaked, it’ll have enough for several days even when the temperature is high.
So, if you have plants that are more exposed to sunlight then you’ll need to water them more than those that are in the shade. Also, plants in the bottom of a slope will accumulate more water than those that are on top. All of these considerations must be taken so that you’ll have a system that fits your garden’s needs.
2. Get to Know Your Components
Getting to know all of the components you’ll need is crucial to avoid costly mistakes and that constant trip to the hardware store. If you’re new to setting up your garden’s plumbing, it’s important that somebody can advise you on what to do, many customers find https://allserviceplumbers.com/ accommodating to queries in all matters of plumbing. We may have our own plan on how to set up the irrigation system and it is a source of pride that we do it ourselves. However, it won’t hurt to talk to professionals on how to do things effectively, especially on the part where the water connects to your home’s mainline. They will be able to answer questions such as what model and brand to use for your fittings and other components. If you’re planning to automate your irrigation, you’re going to need every information you can get to make sure it works as it is intended. You don’t want to go home and find your front yard flooded and your flower beds soil eroded.
3. Drip and Emitter
Setting up plumbing for line or drip emitters can be a great way to release water to the plants’ roots at regular amounts. It can deliver precise amounts of water regardless of any changes in water pressure. Flower beds can be vulnerable if you set up a plumbing where water shoots directly to them. Consider a drip emitter system where it feeds directly to the soil and there is not much pressure or force that could harm the plants physically. It’s one of the most efficient ways of irrigation so you won’t have so much waste with this system.
4. Use Cisterns and other Water-Saving Containers
You can also supplement your garden’s water supply by catching rainwater and storing them into cisterns. This way you’ll have an alternative source and save up on utility costs. You attach the inlet of the tank to catch roof runoff and cover it to deal with insect problems. You can also install a pump to help you get the water out of the tank faster. You just have to make sure that you can control the water from your mainline and the water to the tank. You don’t want to overwater your plants nor flood your garden entirely.
5. Automation and Timing
It’s possible to set everything so that water is applied automatically. You can either use a timer or use moisture sensors to help you determine the timing. It is important to know when is the best time to water your plants and if the plants need water at all. You’re going to have three factors when you consider automating your irrigation system.
● Plant Age
One is the age of the plant, if you have new plants they’ll need more water because their roots have not yet penetrated different areas within the ground.
Time, unless you’re using a drip or soaker hose, you should water your plants between 5am to 9am. The soil will have enough time to absorb the water compared when watering during midday when it’ll just get evaporated quickly. Also, if you water during the evening your plant will be moist throughout the night and fungi and other bacteria will develop on the wet foliage.
● Soil Condition
The soil is essential to a plant’s growth and its conditions will be a significant factor when it comes to irrigation systems. When the soil is dry and there is no moisture, then irrigation is required to keep your plants from wilting. When it has low moisture, you’re going to have to water it a little. And if the soil is dark with obvious signs of moisture, it will stick together so that you can form a ball with it, you can hold off on the irrigation for a while.
A beautiful garden can have positive effects on you, your family, and to anyone who’ll enjoy its life and vibrance. It’s also good for your immediate environment as well as in general. If done properly, you can earn from your garden. That is why you should be able to construct an irrigation system to sustain your garden, saving a lot of cost in time and money. Regardless of the type of garden you have, just know that they’ll grow abundantly given the proper care and time.