Turning a Carport Into an Enclosed Garage – DIY Tips

0
81

Turning a Carport Into an Enclosed Garage - DIY Tips

In the past, carports, especially in Phoenix AR, have been used by people to store cars. Some people even lived in them. However, if you are looking for a new place for your car and would like it to be enclosed on all sides instead of just one or two, this article will show you how to transform an existing carport into an enclosed garage with some carpentry skills and patience!

You can save lots of money by doing this project yourself- plus, because the walls are already there, it’s easier than building from scratch as well. All you need is some basic carpentry skills and patience!

Measures and Cuts

The first step is to take some measurements. You will need to know the length, width, and height of your carport. Once you have these measurements, you can begin making your cuts. The easiest way to do this is by using a saw. If you don’t have one, you can always ask a friend or family member for help.

The first cuts you will need to make are the top and bottom plates. The top plate is the piece that goes across the top of the carport, while the bottom plate is the piece that goes across the bottom. Measure and cut these pieces so they fit the dimensions of your carport.

Next, you will need to measure and cut the studs. The studs are the pieces that make up the walls of your garage. They should be around 8 feet long, but you can always adjust this depending on the size of your carport. However, by adding a garage door, you will need to make sure that the studs are long enough to cover the entire opening. That’s why, once you have measured and cut the studs, it’s always a good idea to test them out in the carport to make sure they fit properly.

The final cuts you will need to make are for the rafters. The rafters are the pieces that hold up the roof of your garage. They should be around 6 feet long, but you can always adjust this depending on the size of your carport. Once you have cut the rafters, you will need to make notches in them so they fit around the top plate and the bottom plate.

Assembling the Walls

The next step is to assemble the walls. This can be a bit tricky, but with some patience and careful measurements, you can do it! Start by laying the bottom plate on the ground and then putting the studs in place. Make sure they are evenly spaced apart. Once the studs are in place, you can attach them to the bottom plate with nails or screws.

Next, put the top plate in place and attach it to the studs. Make sure it is flush with the top of the carport. Then, attach the rafters to the top plate. You can do this by drilling pilot holes and then using screws or nails.

If you would like to add a garage door to your new garage, now is the time to do it. The easiest way to do this is by using a premade garage door kit. Make sure the kit is the right size for your opening. Then, follow the instructions that come with the kit to install it.

Finishing Touches

Once the walls are up, it’s time to add some finishing touches! You can paint or wallpaper the walls, or even add some shelves or cabinets. You can also install a door handle, a lock, and even a garage door opener. By adding these finishing touches, you can make your new garage feel like home!

In addition, you may also want to consider adding some insulation to the walls and the roof of your garage. This will help keep your car protected from the weather and external noise.

walls and the roof

The Materials and Tools You Will Need

You can use different materials for enclosed garages, like metal, vinyl, or composite sidings. The most popular sidings are vinyl and composite sidings because they are durable and long-lasting. However, they can be a bit expensive, so if you are on a budget, metal sidings may be a better option for you.

The process of building a garage with metal sidings is almost the same as with vinyl sidings. The only difference is that you will need to use a drill to attach the metal panels to the studs.

The tools you will need for this project include a saw, a drill, screws, nails, and a level. You may also want to consider using a power screwdriver or a power drill/driver to make the job a bit easier. Other tools can come in handy and include a hammer, a tape measure, a square, and a level.

The Permits You May Need

Depending on where you live, you may need to get some permits before you start construction on your new garage. Check with your local municipality to see what is required. You may need a building permit or a zoning permit.

For example, to build a garage in Phoenix, you will need a building permit from the city. The application process is relatively simple and can be done online. You will need to provide some basic information like your name, address, and contact information. You will also need to provide a detailed drawing of the garage to be, including the dimensions.

The Cost

The cost of building an enclosed garage can vary depending on the size of the garage, the type of materials you use, and the contractor you might hire. However, in most cases, it will be less expensive than building a new garage from scratch.

If you are doing the project yourself, you can expect to spend around $1,500 for materials. This includes the cost of the lumber, the roofing, the sidings, and the trim. If you are hiring a contractor, the cost will be higher, but it will still be less than building a brand new garage.

Conclusion

A carport can easily be turned into an enclosed garage with a few simple DIY tips. All you need are some basic carpentry skills and some patience! So, if you’re looking for a way to keep your car safe and dry, consider converting your carport into a garage!

This site uses Akismet to reduce spam. Learn how your comment data is processed.